Advanced Autodesk Inventor

I.     Course Prefix/Number: CAD 241

       Course Name: Advanced Autodesk Inventor

       Credits: 3 (2 lecture; 2 lab)

II.    Prerequisite

CAD 240

III.   Course (Catalog) Description

This course explores advanced topics in Autodesk Inventor. Student projects encompass parametric modeling, 3-D sketching, surfacing, database functions, and simulating motion. Also covered is an advanced study in 3-D modeling techniques and database techniques.

IV.   Learning Objectives

Intermediate/Advanced parametric modeling and assembly techniques.

V.    Academic Integrity and Student Conduct

Students and employees at Oakton Community College are required to demonstrate academic integrity and follow Oakton's Code of Academic Conduct. This code prohibits:

• cheating,
• plagiarism (turning in work not written by you, or lacking proper citation),
• falsification and fabrication (lying or distorting the truth),
• helping others to cheat,
• unauthorized changes on official documents,
• pretending to be someone else or having someone else pretend to be you,
• making or accepting bribes, special favors, or threats, and
• any other behavior that violates academic integrity.

There are serious consequences to violations of the academic integrity policy. Oakton's policies and procedures provide students a fair hearing if a complaint is made against you. If you are found to have violated the policy, the minimum penalty is failure on the assignment and, a disciplinary record will be established and kept on file in the office of the Vice President for Student Affairs for a period of 3 years.

Please review the Code of Academic Conduct and the Code of Student Conduct, both located online at

VI.   Sequence of Topics

See D2L

Week / DateTopics CoveredReading
1 Parametric Modeling Fundamentals - Quick start
Work Features
Lesson 1
Lesson 2

2 User interface
The Standard Toolbar
Lesson 3
Lesson 4

3 3D Sketches Lesson 5

4 Adaptivity Lesson 5

5 Surfacing
Thin Wall
Thin Container
Lesson 6
Lesson 7
Lesson 8

6 Derived Parts
Stacking Parts
Lesson 9
Lesson 10

7 I-parts
Creating a standard i-part
Lesson 11
Lesson 12

8 I-mates
Creating an I-mate
Lesson 13
Lesson 14

9 Lighting, Materials, and Colors Lesson 15

10 Engineers Notebook Lesson 16

11 Design Assistant Lesson 17

12 Collaboration Lesson 18

13 Simulating Motion Lesson 19

14 Presentations (self study - no class but lab open) Lesson 20

15 Assembly Drawings Lesson 21

16 Final Exam

The instructor reserves the right to make adjustments by informing the class accordingly.

VII.  Methods of Instruction

Lecture demonstration of drawing techniques with a hands on focus emphasizing the solution of drawing problems.

Course may be taught as face-to-face, hybrid or online course.

VIII. Course Practices Required

Course may be taught as face-to-face, media-based, hybrid or online course.

IX.   Instructional Materials

Note: Current textbook information for each course and section is available on Oakton's Schedule of Classes.

Autodesk Inventor R5 fundamentals: Conquering the Rubicon; Elise Moss, SDC Publications.

X.    Methods of Evaluating Student Progress

Drawings will be graded according to standard drawing conventions provide on assignment sheets, notes and handouts.  Late submissions will incur a 10% late fee.

A 90%
B 80%
C 70%
D 60%
F Below 60%
Attendance 10%

XI.   Other Course Information

If you have a documented learning, psychological, or physical disability you may be entitled to reasonable academic accommodations or services. To request accommodations or services, contact the Access and Disability Resource Center at the Des Plaines or Skokie campus. All students are expected to fulfill essential course requirements. The College will not waive any essential skill or requirement of a course or degree program.

Oakton Community College is committed to maintaining a campus environment emphasizing the dignity and worth of all members of the community, and complies with all federal and state Title IX requirements.

Resources and support for
  • pregnancy-related and parenting accommodations; and
  • victims of sexual misconduct
can be found at

Resources and support for LGBTQ+ students can be found at

Electronic video and/or audio recording is not permitted during class unless the student obtains written permission from the instructor. In cases where recordings are allowed, such content is restricted to personal use only. Any distribution of such recordings is strictly prohibited. Personal use is defined as use by an individual student for the purpose of studying or completing course assignments.

For students who have been approved for audio and/or video recording of lectures and other classroom activities as a reasonable accommodation by Oakton’s Access Disabilities Resource Center (ADRC), applicable federal law requires instructors to permit those recordings. Such recordings are also limited to personal use. Any distribution of such recordings is strictly prohibited.

Violation of this policy will result in disciplinary action through the Code of Student Conduct.